FLAGS

FLAGS & OUTDOOR DISPLAYS

  • Falcon Flags

    $70.00$288.00
    Perfect for quantity orders, the new flagpole hardware redesign for our Best Seller Falcon Flag® is the economical choice. Plus, with upgraded hardware, its new pole connections give more height options. Now in more sizes, you can find your favorite Falcon® flags in these heights: XS (7'), SM (8.25'), MD (10.5'), LG (14'), XL (17'). Falcon Flag® is intended for display outdoors. Insert the spike base into grass or use the X-base to stand on concrete. We custom print your graphic artwork on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided prints, and double-sided prints are finished with a silver-gray blocker that lays between. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
  • Feather Flags

    $78.40$219.80
    This 9.84 ft. Small Feather Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
  • Foundation Outdoor Banners

    $193.55$1,210.20
    Sturdy and lightweight aluminum frame for outdoor display. Banners easily mount to both sides of the frame with bungee cords.
  • Mamba Flags

    $141.40$361.20
    This Small Mamba Banner Stand outdoor flag comes with a single-sided custom print, stand and X-base. Use this 10.125 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
  • Mondo Flags

    $117.60$803.60
    This 13ft Mondo Flagpole banner stand comes with a single-sided custom print, stand and water base. A fresh, new design of the giant pole, the Mondo flagpole is ideal for outdoor events, conference, sport events, etc. The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh fabric material by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. The telescopic aluminum flagpole fits into a plastic base that can be filled with water for stability. The flag is held with rings. Mondo flagpoles are easy to handle and install.
  • Splash Flags

    $128.80$207.20
    This Splash Outdoor Banner Stand is great for indoor and outdoor use. Slide the banner onto the top perpendicular bar, then fastened to the pole using the 8 included plastic clips. As you might tell, the banner flag is very secure and displays proudly and fully with help of the top bar. The pole height can be adjusted from 4.1 ft. to 10.4 ft.The flag is only available single sided due to the mesh fabric with heights ranging from 5 ft. to 8 ft. The flag width is 32 inches. The 25-pound weighted steel base provides stability.
  • Store Front Flags

    $267.33$869.99
    This Store Front flag is designed for storefront display, but can be placed indoors as desired. Its heavy steel square base provides support while on display. The pole is made of up materials such as aluminum, plastic and fiberglass. The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation (single-sided or double-sided options). Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for the pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base. (See additional pictures to see close up.)
  • Sunbird Flags

    $86.80$287.00
    Introducing the Sunbird Flag, our newest teardrop shape flag that is produced using the same exact materials as our Best Seller Falcon Flag. Perfect for quantity orders, this new flagpole hardware is the economical choice. Plus,its pole connections give height options. Sunbird Flag comes in these four heights: SM (7.5'), MD (9'), LG (12'), XL (15'). Sunbird Flag is intended for display outdoors. Insert the spike base into grass or use the X-base to stand on concrete. We custom print your graphic artwork on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided prints, and double-sided prints are finished with a silver-gray blocker that lays between. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
  • Teardrop Flags

    $222.00$1,251.56
    This Small Teardrop banner stand outdoor flag comes with a single-sided custom print, stand and spike base. With the default spike base, use this 8.2 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Title

Go to Top